|
LX 200 DGR Series Rolling Diaphragm Gauge |
| |
Download the Product Broshure 
|
 |
 |
| |
|
|
| |
|
DP Range: 0 to 5 up to 0-100 Psid |
| COMBINATIONS |
|
|
| Gauge |
Specifications |
|
 |
Accuracy |
±2% of the FSD (Ascending) |
| Migration |
No migration ; Zero leakage from high to low port |
| Range |
0-5 Psid up to 0-100 Psid or equivalent ranges in other units |
| First marking on the scale |
15% of the FSD |
 |
Sensing element |
Diaphragm |
| Wetted parts |
Diaphragm, body material, 302 SS spring & ceramic magnet |
| Case material |
Engineered polymer |
| Dial size |
2.5”(square), 4.5” (round) |
| Mounting |
Direct, front flange, 2” pipe & surface mounting |
| Gauge+switch |
Maximum working pressure |
3000 psi. |
 |
Maximum process temperature |
175° F (Immersion Temperature Rating) |
| Body material |
Aluminum, Brass & 316 SS |
| Seals |
Buna-N, Viton, EPDM diaphragm & ‘O’ rings |
| Window |
Plexiglass |
| Connection |
1/4” NPT(F) Std., other upon request |
| Porting |
In-line, rear, bottom, in-line & bottom |
 |
Protection for gauge & switch |
NEMA-4X/IP 65 |
| Over range protection |
Up to max. working pressure from high side only
Never pressurize only LP side beyond 350 Psi |
| |
|
| Options |
Switches (Adjustable in 30-100% of FSD) |
| Liquid filling |
Nema 4X Enclosure |
| MOUNTING BRACKETS |
Red follower pointer (except 6") |
1 or 2 SPSTs with a terminal strip |
| Gauge |
Customer logo |
1 or 2 SPSTs with a built in relay |
 |
Dual scale |
1 or 2 SPDTs with a terminal strip |
| Colored Arc |
Switch adjustment range 30-100% FSO |
| Filter mesh in (+) connection |
|
| Descending calibration |
|
| NACE |
|
| |
|
| Gauge+switch |
|
 |
|
